Need Help With Universal Remote

[PoPJaY]

Ok I have this TV

http://i168.photobucket.com/albums/u180/lawnbaby/00000115015-Toshiba32D4632inchdigit.jpg

and this universal remote

http://i168.photobucket.com/albums/u180/lawnbaby/DBPM-435S.jpg

does any know how to enter the code for the TV/know the codes?

i just need to figure out how to connect it to my tv

[Drayu]

google the tv model and codes to see what the codes are, OR go to the philips website and look in the manual for that remote.

[PoPJaY]

thats the prob. i don't know what the model is

the manual is gone

[FozzyBear]

you can look on the back of the tv.

You can also find info inside of the remote, usually where the batteries go.

I would look up your remote and see how to cycle through all the codes till you find one that works.

[Rajun Cajun]

Try here...codes are usually brand specific, not necessarily model number specific. They usually also have more than one code to try. If you notice it works, but not all the features seem to be working keep trying one of the other codes.

http://www.hifi-remote.com/ofa/codes-tv.shtml

TV Toshiba 0156, 0060, 0154

[Rajun Cajun]

I'm bored with no work today. I'm putting off snow blowing the drive way so here you go.

This may work for you as well. I found this at remote central. http://www.remotecentral.com/cgi-bin/mboard/forums.cgi


Instructions on how to use the CODE SEARCH button:

In this example we will say we are setting up the TV button for our television set.

1. Manually turn the power to your television set ON.

2. Hold down the Code Search button on the remote for 2 or 3 seconds until the light on the remote stays on (aka stays solid).

3. Push the TV button on the remote.

4. Point the remote at your television and slowly press POWER until the television turns OFF.

5. Press the ENT button on the remote. (It is under the number 7 button.)

That's it! I lost the manual to my remote and was so excited when I figured this out I just had to post it. Have fun!

[PoPJaY]

thnxs rajun

well I'm holding ti down till it goes solid, then hitting TV but the tv's not turning off

i dunno what teh deal is

[Wibby]

When I was setting up my cable remote to work with my tv manually putting in the code didn't work for me so I did the automatically find it and it took forever. So just keep at it and eventually you'll get it to work.

[Killerfurby6]

look here there you can download the manual for your cl034 (the one you have)
but you need to register first (free registration)!!
pdf file on the bottom of the page!!
http://www.kitchenmanuals.com/ex/thread/view/idThread/6473

if the codes are not a part of the manual just tell it to me and i'll search more!!