View Full Version : Having trouble connecting to VAC enabled servers?
-LiT- Killer_B
05-09-2005, 08:16 PM
Try opening up your ports on your firewall...
If your configuration software requires port numbers, please use the following:
UDP 1200 (used for friends service)
UDP 27000 to 27015 inclusive
TCP 27020 to 27039 inclusive
TCP 27040 and 27041 only for CyberCafe Owners
I middle two are the ones needed.
I had this problem getting on secured servers so I figured I would post it for others who are having the same problems.
More info can be found at:
http://steampowered.custhelp.com/cgi-bin/steampowered.cfg/php/enduser/std_adp.php?p_faqid=374
Happy :mp5: and thank you valve for VAC
-Killer_B
Ok B english I didn't even know I had a firewall. Never the less I can't connect. Could it be something else?
-LiT- Killer_B
05-09-2005, 09:49 PM
If you don't have a physical firewall, as in a box that routes your traffic from you cable/dsl modem, then you probably have your firewall turned on through windows xp. When service pack 2 is installed it turns it on automatically. To turn that off go into control panel and then windows firewall. You can also open those ports up with the new and improved windows firewall, but thats another lesson... :D
ok windows sp2 firewall is off still no workie
Vryllyn
05-09-2005, 10:11 PM
I don't have Windows Firewall on, but I have the Norton Worm Protect on and I even turned that off. I can't connect to WiH but I've been able to connect to other Secured servers.
Rusty Umbrella
05-09-2005, 10:29 PM
hmm i got in earlier today after i opened up those ports but now all of a sudden i cant get back in, these problems are bugging me now
OK. I went to windows firewall and unchecked all valve products and rebooted and it worked for me. Hope that helps.
wihadmin
05-10-2005, 09:06 AM
On the server side, we see the message "No Steam Logon" each time you guys tried to join. Then it disconnects you.
wihadmin
05-10-2005, 02:48 PM
We've turned off VAC Beta on FF #2 until it comes out officially. We'll turn it off on FF #1 when we get a chance when there are no players on.
Phenix
05-10-2005, 02:53 PM
BETA!?!?!?!?! Touche valve, touche!
wihadmin
05-10-2005, 03:31 PM
VAC Beta is only for connectivity debugging. And as you can see, there are still some problems with connectivity.
Bonez
05-10-2005, 08:11 PM
hey wihadmin, can you enable "sv_turbophysics 1" on the servers, it basically makes the physics more realistic, as in barrels don't push you back(and you can actually stand on them) and some other stuff.
DemonEyes
05-12-2005, 11:29 PM
Great now I've got this damn problem, I can't connect to FF#1 now. And I was playing on it earlier tonight, but all of a sudden I can't get on wtf?
Powered by vBulletin® Version 4.1.12 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.